Menu
≡
╳
- Home
- Reviews
- 0411 220 488 Brisbane and Surrounding Suburbs
-
follow us
-
FacebookAdd us to Facebook and keep up-to-date with the latest from Brisbanes Finest Floors -
LinkedInOur Linkedin network is a great place to meet the best professionals in our industry.
-
PinterestSee more of our amazing floors
-
Category Archives: FAQS
VIEW ALL
August 22, 2017
ARE YOUR BLACKBUTT TIMBER STAIRS ANTI SLIP SAFE. In 2014 the Australian Building Codes Board and State government regulators introduced new regulations for…
July 31, 2017
Floor sanding preparation: Before we arrive to sand your floors If building or renovating, the start date for sanding and coating floors is…
February 22, 2017
Terms Of Trade – Brisbanes Finest Floors M. Thompson Pty Ltd T/A Brisbanes Finest Floors – Terms & Conditions of Trade Definitions…
August 27, 2015
We recommend at least 24 hours to allow the coating to cure. Full hardness is achieved in 14 to 21 days but general…
August 27, 2015
This depends on what you are after and what has been used previously There is a large range of products available such as…
August 27, 2015
Decks should generally be re-coated with the existing product every 12 or 18 months depending on the level of wear and exposure to…
August 27, 2015
Buffing the deck may be sufficient before re-coating it. This is if old coating is in good condition. However in most cases, the…
August 27, 2015
It depends on the size of the deck and weather conditions. An estimate of days will be advised on the quotation.
August 27, 2015
Gaps between the floorboards should not be filled. Gaps between the boards are not filled because shrinkage and expansion in timber will cause…
August 27, 2015
It is strongly recommended that all painting except for the final coat on skirting boards be completed. The final coat may be applied…
August 27, 2015
Timber floors are best cleaned with a damp cloth. Sticky spills or more determined dirt can be removed by taking a bucket of warm…
August 27, 2015
We recommend at least 24 hours to allow the coating to cure. Full hardness is achieved in 14 to 21 days but general…
August 27, 2015
While we have the latest up to date machines on the market that minimise dust distributing throughout the areas we do. This does not…
August 27, 2015
Can I stay in my home during floor sanding process? Yes, however access to the floors will be restricted because of the need…
August 27, 2015
Absolutely! Brisbanes Finest Floors have all licenses needed to supply, install and finish timber floors, cork tiles and parquetry. We are fully licensed…